How to reduce your water bill with helpful plumbing tips

 

Conservation of funds through conservation of water and electric is a dream for all home and business owners. How many times have you told a family member to shut the lights off when they leave the room, or to turn off the water while brushing their teeth? Other than obvious factors that lead to reduced bills, you may feel as though the only way to slash your bill is to minimize daily usage.  However, there are many helpful plumbing tips you should consider to help save water.

 

Upgrading or repairing appliances is a good start.  First, if you have an older, standard toilet, you should consider replacing it if your budget will allow it. Toilet usage is one of the biggest culprits of water usage, making up approximately thirty percent of your water bill.  However, there are now water-saving toilets, such as low-flow or dual-flush toilets, that will drastically help save water consumption.  If purchasing a new toilet is not in your budget, there is a way to ensure that your toilet is not over-using water. Make sure that your toilet is not consuming water, or “running,” when not in use. If it is, it could be a sign that the flapper is leaking inside the tank. In this case, call a professional Staten Island Plumber.

 

Another appliance that should be replaced or repaired are your faucets.  There are several replacement options for faucets, depending on your budget.  There are low-flow faucets that are not too pricey but cut water consumption a decent amount. A more elaborate option is an aerator faucet.  Aerator faucets are great options as they moderate and modify overall flow; their design also adds more elegance to a bathroom.  Dripping faucets can cost you upwards or beyond one hundred dollars per year.  To ensure that you are not “throwing money down the drain,” make sure your taps are turned off.  If a closed tap continues to drip, it should be repaired or replaced. Just as with toilets, if you notice a problem with your faucet, call a licensed and certified plumber in Staten Island Sewers .

 

Another quick fix that will lower your water consumption, putting more money back into your pockets is changing the shower head.  Low-flow shower heads save 20,000 gallons of water per year, as they cut the water flow per minute nearly in half.  And, since I know you are likely concerned, you don’t sacrifice water pressure.

 

Do not wait for drains to become clogged before you maintain them.  Once drains are clogged, your only choices are professional plumbers or property damage.  Instead, opt to keep your drain in top-notch condition with simple steps. Simply pour a cup of baking soda, and then a cup of vinegar down your drains on a monthly basis.  This will unclog the pipes and make your drain operate much more smoothly.

 

There are many ways to save water consumption and put money back in your pocket. If you have any questions about these tips or have a more serious plumbing issue, contact a professional Staten Island plumber today.

 

 

Are you failing your fire extinguisher inspection?

Are you failing your fire extinguisher inspection?

Every building; commercial or residential, needs to ensure the highest safety standards. These standards are not just necessary but also mandatory and thus inspected by officials. It is important to ensure that you know what you need to do in order to pass these inspections, or else you might have to face heavy fines and fees. So today we are taking a look at Long Island Contractors to help build your home the right way. Let’s talk about the things that are sure to make you fail your fire extinguisher inspection. So, here’s a checklist, and if you tick any one positive be prepared for a red mark on your test- see here- Wiki Page Fire Inspection

  • If you have an unmarked or non visible street address on the front of your building it’s a complete fail from the very first sight! So make sure you highlight the address so it’s clearly visible to one and all.
  • All buildings must have an adequate number of exit doors. These exit doors must be easily opened from the inside. Make sure your exit doors aren’t jammed or difficult to open from the inside. If your doors are difficult the doors to the inspection might close on you!
  • If your stairways, aisles, pathways or walkways have obstructions you fail your but using a greatr Duct Cleaning Long Island company will help your business. Clear the way to make space for rushed and hurried movement; remove all obstacles and hurdles that block free movement.
  • Non functioning emergency lights and signs are another no- no! Fix all lights and ensure the signs are well placed and lights are working at all times.
  • If any electrical panel or unit is uncovered chances are it’s a straight red mark by the NYC fire extinguisher inspection team. So cover all panels and units to ensure safety and a green signal!
  • If you use temporary hacks like extension cords for permanent uses say bye bye to the inspection!
  • A fire extinguisher inspection without visible and working fire extinguishers is quite a fail! Install and make available enough fire extinguishers in proper working condition.
  • An unserviced fire sprinkler system is another obvious negative marking! Check your fire sprinkler system and keep it in top working condition.
  • If you have a commercial cooking operation areas ensure that it has been fire suppression serviced every six months. Maintain records to pass your Junk Car Removal Long Island.
  • Any hazardous material that is not stored properly or stored without permission is a complete fail too!

So buckle up and make your checks to sail through the NYC Fire extinguisher inspection.

 

 

Every building; commercial or residential, needs to ensure the highest safety standards. These standards are not just necessary but also mandatory and thus inspected by officials. It is important to ensure that you know what you need to do in order to pass these inspections, or else you might have to face heavy fines and fees. So today we are taking a look at NYC fire extinguisher inspection. Let’s talk about the things that are sure to make you fail your fire extinguisher inspection. So, here’s a checklist, and if you tick any one positive be prepared for a red mark on your test-

  • If you have an unmarked or non visible street address on the front of your building it’s a complete fail from the very first sight! So make sure you highlight the address so it’s clearly visible to one and all.
  • All buildings must have an adequate number of exit doors. These exit doors must be easily opened from the inside. Make sure your exit doors aren’t jammed or difficult to open from the inside. If your doors are difficult the doors to the inspection might close on you!
  • If your stairways, aisles, pathways or walkways have obstructions you fail your fire extinguisher inspection! Clear the way to make space for rushed and hurried movement; remove all obstacles and hurdles that block free movement.
  • Non functioning emergency lights and signs are another no- no! Fix all lights and ensure the signs are well placed and lights are working at all times.
  • If any electrical panel or unit is uncovered chances are it’s a straight red mark by the NYC fire extinguisher inspection team. So cover all panels and units to ensure safety and a green signal!
  • If you use temporary hacks like extension cords for permanent uses say bye bye to the inspection!
  • A fire extinguisher inspection without visible and working fire extinguishers is quite a fail! Install and make available enough fire extinguishers in proper working condition.
  • An unserviced fire sprinkler system is another obvious negative marking! Check your fire sprinkler system and keep it in top working condition.
  • If you have a commercial cooking operation areas ensure that it has been fire suppression serviced every six months. Maintain records to pass your fire extinguisher inspection NYC.
  • Any hazardous material that is not stored properly or stored without permission is a complete fail too!

So buckle up and make your checks to sail through the www.doublecheckbuilders.com

 

 

Picking the Right Cubicle for Your Work space

used cubicles long island

Selecting the right used office furniture NYC nyc ea needs are the same. There are different office work area arrangements to check out. We should examine the most widely used common cubicles setups so you can choose which desk area sort is best for your business. It needs to be remembered that a Moving Company on Long Island can also offer a professional ambience and completely alter the look of the office space entirely. In this article we are going to present a few varieties, to make it convenient for you to know certain factors while selecting the right cubicle for the office area.

Low Wall, Collaborative Cubicles

Low divider used cubicles are the perfect office desk area designs for organizations that encourage teaming and free-streaming discussions over the workplace. Low divider cubicle within office areas are ordinarily 54″, which permits you to converse with partners from the solace of your own desk. To promote further coordinated efforts, the low divider desk areas frequently consolidate landmass work surfaces where easy and quick stand up gatherings can occur. This kind of office work space is regularly seen in creative workplaces, for example, promoting firms, tech organizations and a lot more.

Private Office Cubicles

Private office long island used cubicles are more like your cliché, high-divider cubicles that we are all used to seeing. High-divider office work spaces are most appropriate for office situations where a high level of security is required. Law workplaces, telephone centers, banks, and similar other offices use office desk cubicles that have dividers of 60″ or higher. Private office cubicles are perfect for workplaces that impart touchy.

Medium Height Cubicles

54″ medium height office used office furniture long island is measured in the middle of the private office and low divider desk areas. 54″ desk areas are sufficiently high that you don’t have direct sight lines over the workplace, yet sufficiently low that you can pop up and have a discussion with somebody in a desk area alongside you. Medium height work areas are perfect for workplaces that require a touch of security while considering simple employee interaction. If you are looking to start a new business, then above all are the different types of used cubicles that you can check out.